Sensitivity

Accelerometer sensitivity formula

Accelerometer sensitivity formula
  1. What is the sensitivity of an accelerometer?
  2. How is accelerometer calculated?
  3. What is mV g sensitivity?

What is the sensitivity of an accelerometer?

Accelerometer Sensitivity:

The ratio of change in acceleration (input) to change in the output signal. This defines the ideal, straight-line relationship between acceleration and output (Figure 1, gray line).

How is accelerometer calculated?

An accelerometer actually measures normal force or restoring force which we equate to acceleration using the formula, F=ma.

What is mV g sensitivity?

It describes the conversion between vibration and voltage at a reference frequency, such as 160 Hz. Sensitivity is specified in mV per G. If typical accelerometer sensitivity is 100 mV/G and you measure a 10 G signal, you expect a 1000 mV or 1 V output.

Kalman Kalman Filter - Comparing the Static Kalman gain and the Dynamic/Recursively updating Kalman Gain
Kalman Filter - Comparing the Static Kalman gain and the Dynamic/Recursively updating Kalman Gain
Why Kalman filter is recursive?What is the Kalman gain?What is the advantage of Kalman filter?What does Kalman filter minimize? Why Kalman filter is...
Design Design the digital IIR filter with the following specifications
Design the digital IIR filter with the following specifications
How to design digital IIR filter?Which technique is used to design an IIR filter? How to design digital IIR filter?In general, the design of an IIR ...
Domain Synthesizing a pure tone in Frequency Domain can it be done more efficiently?
Synthesizing a pure tone in Frequency Domain can it be done more efficiently?
Why does frequency domain analysis is being more preferred rather than the time domain?Why is frequency domain better?What is frequency domain proces...