With given Sampling rate, what max frequency human voice can be captured?

The human speaking voice typically has frequencies of up to 4000 Hz, so a sampling rate of 8000 Hz is sufficient to sample it with an acceptable quality. This is why a sampling frequency of 8 kHz is often found within codecs used for VoIP.

1. What's the max frequency of human voice that can be captured?
2. Which frequency is used in voice sampling?
3. What is the highest audio sampling rate?
4. What is the max frequency of human voice in FDMA?

What's the max frequency of human voice that can be captured?

In telephony, the usable voice frequency band ranges from approximately 300 to 3400 Hz. It is for this reason that the ultra low frequency band of the electromagnetic spectrum between 300 and 3000 Hz is also referred to as voice frequency, being the electromagnetic energy that represents acoustic energy at baseband.

Which frequency is used in voice sampling?

Speech sampling

For most phonemes, almost all of the energy is contained in the 100 Hz – 4 kHz range, allowing a sampling rate of 8 kHz. This is the sampling rate used by nearly all telephony systems, which use the G.

What is the highest audio sampling rate?

The Nyquist Theorem states that the highest audio frequency we can record is half of the frequency of the sampling rate. This means that with a sample rate of 44.1 kHz, we can record audio signals up to 22.05 kHz.

What is the max frequency of human voice in FDMA?

The fundamental speaking frequency of humans can reach up to around 1kHz, although higher values than, say, 500Hz usually appear only while singing.