Vivado debug

1. How do I debug Vivado?
2. What is FPGA debugging?
3. How do you use ILA in Vivado?
4. Does Vivado support artix 7?

How do I debug Vivado?

Select Tools > Set up Debug from the Vivado Design Suite main menu, or click Set up Debug in the Flow Navigator under the Synthesized Design section.

What is FPGA debugging?

The most common techniques to implementing in-circuit debug capabilities in FPGAs use either an embedded logic analyzer, external test equipment, or dedicated signal probe hardware embedded within the FPGA fabric. The embedded logic analyzer is typically implemented using FPGA fabric and is inserted into the design.

How do you use ILA in Vivado?

Click on Run Implementation and then on OK. After Vivado finish running the implementation, click on Generate Bitstream and then on OK. After Vivado finishes generating the bitstream, click on Open Hardware Manager and then on Open Target, and finally on Auto connect.

Does Vivado support artix 7?

The devices that are supported in the Vivado tool are Virtex-7, Kintex-7, Artix-7, and Zynq-7000.