Methods

Ssb modulation and demodulation

Ssb modulation and demodulation
  1. What is SSB demodulation?
  2. What are the methods for SSB modulation?
  3. How can we demodulate an SSB signal?
  4. What is DSB and SSB modulation?

What is SSB demodulation?

The SSB AM Demodulator Passband block demodulates a signal that was modulated using single-sideband amplitude modulation. The input is a passband representation of the modulated signal. Both the input and output signals are real scalar signals. This block works only with real inputs of type double .

What are the methods for SSB modulation?

There are three well known methods of SSB generation using analog techniques, namely the filter method, the phasing method, and Weaver's method.

How can we demodulate an SSB signal?

There are four ways to demodulate a transmitted single sideband (SSB) signal. Those four methods are: synchronous detection, • phasing method, • Weaver method, and • filtering method.

What is DSB and SSB modulation?

Single side band (SSB) is an amplitude modulation technique in which only one sideband (upper or lower) is transmitted and Double side band (DSB) is a modulation technique in which both the upper and lower sidebands are transmitted simultaneously.

How does matched filter output provide sufficient statistic when the channel has ISI + AWGN?
What are the advantages of matched filter?What determine the impulse response of a filter matched to this signal?On what factor the error probability...
FIR-filter output gain
How do you calculate gain of FIR filter?What is the output of FIR filter?What is FIR filter coefficient?What is the frequency response of FIR filter?...
Need help with DTFT problem
What is the need of DTFT?Why do you need DFT even though you have DTFT?What DTFT explain briefly?How do you find DTFT from DFT? What is the need of ...