Output a sine wave from samples-limits?

1. What is the output of a sine wave?
2. How do you find the sample of a sine wave?
3. What would be the suitable sampling rate of a 100hz sine wave instrumentation?
4. How do you get a sine wave in Simulink?

What is the output of a sine wave?

A sine-wave input generates a sine-wave output at the same frequency; the only differences possible between inputand output are the gain and the phase. In other words, the response of an LTI system to any one frequency can be characterized completely, knowing only phase and gain.

How do you find the sample of a sine wave?

Digitizing the sine wave

We can thus use the formula s_n = A � sin(2πfn/sr) where n is a positive integer to generate samples for a frequency of f cycles per second. To make the arithmetic easier, imagine sr = 10,000 and f = 100. n should then range over 0 to 100 for one complete cycle to be output.

What would be the suitable sampling rate of a 100hz sine wave instrumentation?

So, for the 100-Hz sine wave, your ADC should acquire the signal at a sample rate of more than 200 samples/s.

How do you get a sine wave in Simulink?

1. In the left pane of Simulink Library Browser, select the Sources library. 2. From the right pane, select the Sine Wave block.