Howtosignalprocessing
- What is magnitude and phase response?
- What does an IIR filter do?
- What is difference between an IIR system and FIR system?
- What is the magnitude of frequency response?
What is magnitude and phase response?
The minimal-phase response can be calculated from the amplitude response by using the Hilbert transform. The figure above shows the magnitude response of the complex transfer function between loudspeaker terminals and sound pressure at a point on axis in 1 m distance measured by TRF module using a shaped stimulus.
What does an IIR filter do?
The infinite impulse response (IIR) filter is a recursive filter in that the output from the filter is computed by using the current and previous inputs and previous outputs. Because the filter uses previous values of the output, there is feedback of the output in the filter structure.
What is difference between an IIR system and FIR system?
If the impulse response of the filter falls to zero after a finite period of time, it is an FIR (Finite Impulse Response) filter. However, if the impulse response exists indefinitely, it is an IIR (Infinite Impulse Response) filter.
What is the magnitude of frequency response?
The frequency response is characterized by the magnitude, typically in decibels (dB) or as a generic amplitude of the dependent variable, and the phase, in radians or degrees, measured against frequency, in radian/s, Hertz (Hz) or as a fraction of the sampling frequency.
