Line

Calculation of line of sight system gain

Calculation of line of sight system gain
  1. How do you calculate line of sight?
  2. What is the distance for line of sight?

How do you calculate line of sight?

Substitute the above given values of Station1 and Station2 in the formula, = √ (2*height) = √ (2*250) = 22 Miles . = √ (2*height) = √ (2*350) = 26 Miles . Line of Sight = 22 + 26 = 48 Miles.

What is the distance for line of sight?

Based on the curve of the Earth: Standing on a flat surface with your eyes about 5 feet off the ground, the farthest edge that you can see is about 3 miles away.

Response How can I obtain the impulse response using a dual channel FFT?
How can I obtain the impulse response using a dual channel FFT?
How do you find the output of an impulse response?How do you calculate impulse response in DSP?What is impulse response of a system in DSP?What is th...
Simulink PLL Simulink Out
PLL Simulink Out
What is the output of the Simulink code?How do I zoom out on Simulink?How do I enable external mode in Simulink? What is the output of the Simulink ...
Lock-in What advantage do lock-in amplifiers give over doing an FFT and looking at the frequency spectrum?
What advantage do lock-in amplifiers give over doing an FFT and looking at the frequency spectrum?
What is the purpose of lock-in amplifier?How does lock-in detection work?What is the purpose for dual phase lock-in amplifier? What is the purpose o...