Filters

Design FIR filter with half zero coefficions

Design FIR filter with half zero coefficions
  1. What are the coefficients of an FIR filter?
  2. Do FIR filters have zeros?

What are the coefficients of an FIR filter?

The term h[k] is the impulse response of the FIR filter, it is also referred to as FIR coefficients. Each tap in an FIR filter is a multiply-accumulate (MAC) unit which contains a register, a multiplier, and an adder as shown in Figure 1.

Do FIR filters have zeros?

IIR filters have poles and zeroes, and FIR filters have only zeroes.

System Classification of a system
Classification of a system
Systems are classified into the following categories: linear and Non-linear Systems. Time Variant and Time Invariant Systems. linear Time variant and ...
Frequency Relation between height of peaks of DFT and (continuous) FT
Relation between height of peaks of DFT and (continuous) FT
How is DFT related to FFT?What is the relation between DFT and IDFT?What is the relationship between sampling frequency and FFT?How does the length o...
Response Impulse response from the transfer function
Impulse response from the transfer function
How do you find the impulse response from a transfer function?What is the impulse response of a function?How do you find impulse response from Z tran...